Evaluation of the adhesive wear resistance of manganese austenitic steel submitted to thermal cycle

Authors

  • Oscar Fabián Higuera Cobos Universidad Tecnológica de Pereira
  • Carlos Mauricio Moreno Tellez Universidad Pedagógica y Tecnológica de Colombia
  • Manuela Gutiérrez Ramirez Universidad Tecnológica de Pereira

Abstract

AbstractIn this research we studied the effect of thermal cycles of quenching and
tempering on the adhesive wear resistance of austenitic manganese steel
(9.4Mn1C1.9Cr1Si). The material was characterized chemically and me- tallographically. Subsequently the material was tested by cross cylinder
ASTM G-83 with the aim of determining the adhesive wear behavior. The
results indicate that the specimen tempered at 200 ° C has a longer period
of strain hardening than the ones tempered at 400 and 800 º C, making it
more resistant to wear, thus improving the characteristics of the sample
in a state of supply.

Author Biographies

Oscar Fabián Higuera Cobos, Universidad Tecnológica de Pereira

M.Sc. Ingeniería Metalúrgica, Universidad Industrial de Santander. Grupo
de Investigaciones en Materiales Avanzados (GIMAV-UTP), Profesor asistente,
Universidad Tecnológica de Pereira.

Carlos Mauricio Moreno Tellez, Universidad Pedagógica y Tecnológica de Colombia

Ph.D. Ingeniería Metalúrgica, CEIT, Universidad de Navarra (España).
Docente de la Universidad Pedagógica y Tecnológica de Colombia. Grupo de
Integridad y Evaluación de Materiales - UPTC.

Manuela Gutiérrez Ramirez, Universidad Tecnológica de Pereira

Ingeniera Mecánica, Grupo de Investigaciones en Materiales Avanzados
(GIMAV-UTP), Universidad Tecnológica de Pereira (Colombia).

Downloads

How to Cite

[1]
O. F. Higuera Cobos, C. M. Moreno Tellez, and M. Gutiérrez Ramirez, “Evaluation of the adhesive wear resistance of manganese austenitic steel submitted to thermal cycle”, Ing. y Des., vol. 27, no. 27, pp. 151–168, Sep. 2010.

Issue

No. 27 (2010): January - June

Section

Articles